|
Materials:
-Nylon Laminated Foam
-Long Lasting Velcro
-Latex-free
-Manufactured in the USA
Warranty:
ReadyWrap Professional garments are warranted to be free of material defects for six months.
ReadyWrap Quick-Fit garments are warranted to be free of material defects for three months. Solaris will replace any garment found to be defective. Exposure to heat over 130° F will damage the garment and void the warranty.
Washing Your ReadyWrap:
All ReadyWrap garments should be hand washed using lukewarm water and mild detergent. Using a washing machine or dryer may damage the materials. Lay flat on a towel to dry.
Caring for Your ReadyWrap:
To ensure that your ReadyWrap lasts as long as possible, please follow the below tips:
-Don’t donn or doff the garment more than advised by your medical professional. The Velcro will wear faster.
-Don’t overtighten the garment. The material may stretch.
Putting on ReadyWrap Professional Calf (after the garment has been professionally fit):
Step 1 – Gently slide the ReadyWrap over your foot and onto your calf
Step 2 – Once at the correct height, engage one of the middle straps to hold the unit in place
Step 3 – Starting at the bottom of the garment and working up, engage all the straps
Step 4 – Adjust any straps that did not properly close
Taking off ReadyWrap Professional Calf:
Step 1 – Starting at the top of the garment, release all of the front straps
Step 2 – Gently slide the garment over your ankle and foot to remove
Putting on ReadyWrap Professional Foot (after the garment has been professionally fit):
Step 1 – Gently slide the ReadyWrap over your toes and onto your foot
Step 2 – Once properly positioned on the heel, engage the middle two straps to hold the unit in place
Step 3 – Starting at the bottom of the garment and working up, engage all the straps
Step 4 – Adjust any straps that did not properly close
Taking off ReadyWrap Professional Foot:
Step 1 – Starting at the top of the garment, release all the front straps
Step 2 – Using your hand as a guide, slide the garment over your heel and off the foot
Putting on ReadyWrap Quick-Fit Calf:
Step 1 – Align the back spine of the garment with the back of your calf, and the bottom of the garment just above the ankle
Step 2 – Starting with the bottom strap, begin securing each strap to the appropriate level of compression (see Checking ReadyWrap Compression for more information)
Step 3 – Continue fastening the remaining straps
Taking off ReadyWrap Quick-Fit Calf:
Step 1 – Starting with the top strap, begin to unfasten each strap in order
Step 2 – As you unfasten each strap, fold the Velcro tabs back onto the strap to prevent tangling
Putting on ReadyWrap Quick-Fit Foot:
Step 1 – Align heel in the middle strap heel opening
Step 2 – Fasten the middle strap to the appropriate level of compression (see Checking ReadyWrap Compression for more information)
Step 3 – Fasten the strap over the toes to the appropriate level of compression
Step 4 – Fasten the strap over the ankle to the appropriate level of compression
Step 5 – If needed, adjust straps to ensure the appropriate compression and a comfortable fit
Taking off ReadyWrap Quick-Fit Foot:
Step 1 – Remove the ankle strap, folding the Velcro back onto the strap to prevent tangling
Step 2 – Remove the toe strap, folding the Velcro back onto the strap to prevent tangling
Step 3 – Remove the final strap, again folding the Velcro back onto the strap to prevent tangling
Checking ReadyWrap Compression (without the pressure strip):
Step 1 – Donn the garment as normal
Step 2 – Beginning at the ankle, slide your index, middle, and ring fingers underneath the strap. If the compression is correct, the strap should only reach the first knuckle of each finger
Step 3 – Continue Step 2 until all straps have been checked. Reset any straps that are not set to the correct compression
Checking ReadyWrap Compression (with the pressure strip):
Coming Soon.
| 
